List Price: $26.65
Your Price: $18.70
You Save: $7.95 (30 %)
DESCRIPTION 6 oz. Aerosol can (6/cs) SURFACE PREP ACTIVATOR FOR ANAEROBICS Speeds cure of Permatex Threadlockers by 50%. Recommended for use during cold weather. A general purpose solvent for cleaning and preparing parts and surfaces.
|
List Price: $44.99
Your Price: $29.36
You Save: $15.63 (35 %)
PRIMER T Replaces: Mercury 92-59327-1 OMC 384884. Green. Cleans parts, activates surfaces and speeds cure. For use with Threadlockers, Bearing Mount, High Strength Retaining Compound, Gasket Maker and Pipe Sealant with Teflon.
|
List Price: $58.11
Your Price: $38.11
You Save: $20.00 (34 %)
RETAINING COMPOUND RC/609 50 ml. Color: Green. Application: For use on bushings and seals where housing damage is evident. Increases holding power of press fits, retains slip fits and helps prevent bearing spin out.
|
List Price: $41.21
Your Price: $28.93
You Save: $12.28 (30 %)
DESCRIPTION 36 m. bottle, carded (6/cs) MEDIUM STRENGTH THREADLOCKER BLUE OEM specified. All-purpose, medium strength, ideal for all nut and bolt applications 1/4 to 1. Locks and seals while preventing loosening due to vibration. Removable with han
|
List Price: $7.90
Your Price: $5.55
You Save: $2.35 (30 %)
DESCRIPTION 6 ml. Tube, carded (12/cs) HIGH STRENGTH THREADLOCKER RED OEM specified. Especially well suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. May require heat or special tools
|
List Price: $41.21
Your Price: $28.93
You Save: $12.28 (30 %)
DESCRIPTION 36 ml. Bottle, carded (6/cs) HIGH STRENGTH THREADLOCKER RED OEM specified. Especially well suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. May require heat or special too
|
List Price: $9.75
Your Price: $6.86
You Save: $2.89 (30 %)
DESCRIPTION 6 ml. Tube, carded (12/cs) PERMANENT STRENGTH THREADLOCKER RED OEM specified. A permanent, high strength product that is applied to fasteners 3/8 to 1 in size before assembly. Designed for securing parts that must withstand heavy shock,
|
List Price: $20.98
Your Price: $14.73
You Save: $6.25 (30 %)
PERMATEX GEL TWIST THREADLOCKERS No drips, runs, spills or leaks; Gel stays where you want iton the part Patent-pending formula and patent-pending pin-point applicator Great for "hard-to-reach" and vertical applications Easily portable No mess a
|
List Price: $20.98
Your Price: $14.73
You Save: $6.25 (30 %)
PERMATEX GEL TWIST THREADLOCKERS No drips, runs, spills or leaks; Gel stays where you want iton the part Patent-pending formula and patent-pending pin-point applicator Great for "hard-to-reach" and vertical applications Easily portable No mess a
|
List Price: $8.59
Your Price: $6.17
You Save: $2.42 (28 %)
DESCRIPTION .2oz. (6ml) tube, 12/cs 271 RED THREADLOCKER REPLACES STUD N' BEARING MOUNT High-strength adhesive adds 3400 psi of holding power on newer slip and press fit assemblies. Replaces set screws and snap rings. Requires extra effort or special
|
List Price: $46.24
Your Price: $33.26
You Save: $12.98 (28 %)
DESCRIPTION 1.22oz. (36ml) bottle, 6/cs 271 RED THREADLOCKER REPLACES STUD N' BEARING MOUNT High-strength adhesive adds 3400 psi of holding power on newer slip and press fit assemblies. Replaces set screws and snap rings. Requires extra effort or spe
|
List Price: $17.95
Your Price: $12.62
You Save: $5.33 (30 %)
DESCRIPTION 10 ml. Bottle, carded (12/cs) LOW STRENGTH THREADLOCKER PURPLE OEM specified. Designed for fasteners under 1/4 that require occasional adjustment. Removable with hand tools. Use on carburetors, throttle body assembly, and fuel injection
|
List Price: $21.22
Your Price: $14.66
You Save: $6.56 (31 %)
DESCRIPTION Medium Strength Loctite Equivalent #242 THREEBOND THREAD LOCK No matter what locking properties are required, one of these thread locking products will get the job done right the first time. The Thread Lock lineup includes high strength
|
List Price: $21.22
Your Price: $14.66
You Save: $6.56 (31 %)
DESCRIPTION High Strength Loctite Equivalent ##271 THREEBOND THREAD LOCK No matter what locking properties are required, one of these thread locking products will get the job done right the first time. The Thread Lock lineup includes high strength
|
List Price: $7.90
Your Price: $5.55
You Save: $2.35 (30 %)
DESCRIPTION 6 ml. Tube, carded (12/cs) MEDIUM STRENGTH THREADLOCKER BLUE OEM specified. All-purpose, medium strength, ideal for all nut and bolt applications 1/4 to 1. Locks and seals while preventing loosening due to vibration. Removable with hand
|
List Price: $9.15
Your Price: $6.56
You Save: $2.59 (28 %)
DESCRIPTION .2oz. (6ml) tube, 12/cs 242 BLUE THREADLOCKER REPLACES LOCK N SEAL Eliminates need for lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Medium strength (60 ft
|
List Price: $46.24
Your Price: $33.26
You Save: $12.98 (28 %)
DESCRIPTION 1.22 oz. (36ml) bottle, 6/cs 242 BLUE THREADLOCKER REPLACES LOCK N SEAL Eliminates need for lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Medium strength (
|
List Price: $12.24
Your Price: $8.61
You Save: $3.63 (30 %)
DESCRIPTION 6 ml. Tube, carded (6/cs) BEARING MOUNT FOR WORN PARTS OEM specified. A creamy, non-running adhesive used between parts to repair large gaps and severely worn parts. Fills gaps to .020 in diameter. Very rapid cure. Use for refitting worn
|