List Price: $25.64
Your Price: $16.65
You Save: $8.99 (35 %)
INSIDE ANCHOR CORNER Used in the same applications as a 91-104-F Inside Corner but offers extra strength with its anchor chain bar. Accommodates chain up to 1/8".
|
List Price: $249.64
Your Price: $175.32
You Save: $74.32 (30 %)
DESCRIPTION Foamed Float HOWELL 400 DOCK FLOATS Rotational molded from high density polyurethane with UV inhibitors. Wall thickness is a minimum of 5/16" up to 1/2" at fastening points. Recessed flanges and center channel allow float to be used on
|
List Price: $193.24
Your Price: $125.21
You Save: $68.03 (35 %)
DESCRIPTION Empty Float HOWELL 400 DOCK FLOATS Rotational molded from high density polyurethane with UV inhibitors. Wall thickness is a minimum of 5/16" up to 1/2" at fastening points. Recessed flanges and center channel allow float to be used on 2
|
List Price: $145.81
Your Price: $94.49
You Save: $51.32 (35 %)
24" X 8" DOCK WHEEL Tough plastic wheel is molded with virgin high density polyethylene. Center hub fits 1-1/4" or 1-1/2" pipe. Black.
|
List Price: $15.59
Your Price: $10.11
You Save: $5.48 (35 %)
SIDE LEG HOLDER Can be mounted on the inside or outside of the dock frame.
|
List Price: $8.65
Your Price: $5.60
You Save: $3.05 (35 %)
PLASTIC LEG CAPS Has UV inhibitors. Covers raw leg pipe edges for safety. Also adds a finishing touch to the dock. Packaged 4 pieces in a bag with header card.
|
List Price: $9.61
Your Price: $6.24
You Save: $3.37 (35 %)
JOIST CORNER Used to reinforce stringer joints.
|
List Price: $36.20
Your Price: $23.45
You Save: $12.75 (35 %)
BOTTOM PAD With its large surface area, this pad is used in soft bottom areas and leg pipe can extend through the pad into lake bottom for extra lateral support. The pointed corners also grab when the bottom is rocky.
|
List Price: $15.56
Your Price: $10.10
You Save: $5.46 (35 %)
BASE PLATE Used as a footing. It may be bolted to a 2" x 6" piece of lumber and joined to an adjacent leg Base Plate for increased stability.
|
List Price: $8.14
Your Price: $5.27
You Save: $2.87 (35 %)
BACKER PLATE Use on opposite side of all fittings. Prevents pipe from compressing into the wood, resulting in dock sliding down the leg pipe. Also prevents bolts from working into the wood and the lock washers from working loose.
|
List Price: $22.29
Your Price: $14.45
You Save: $7.84 (35 %)
FEMALE T CONNECTOR See MALE T CONNECTOR.
|
List Price: $15.85
Your Price: $10.29
You Save: $5.56 (35 %)
MALE T CONNECTOR Can be used with all styles of Female Connector Hinges. For inside corner support, match with 92-104-F Inside Corner, 92-116-F Inside Anchor Chain Corner, or 99-001-F HD Inside Anchor Chain Corner. May also be placed anywhere on the sid
|
List Price: $10.39
Your Price: $6.75
You Save: $3.64 (35 %)
CONNECTOR PIN Used to join Male and Female Connectors.
|
List Price: $88.80
Your Price: $62.34
You Save: $26.46 (30 %)
HD CONNECTOR HINGE Used at both ends of a ramp when connecting a dock section to shore; where extreme wave action is encountered, or in joining large or multiple sections together where this join could act as a fulcrum or pivot point.
|
List Price: $49.92
Your Price: $32.37
You Save: $17.55 (35 %)
SIDE PIPE HOLDER Bolts to side frame of the dock to anchor it in place while allowing for vertical movement due to water level fluctuations. Use 99-006-F Washer Plates on opposite side.
|